Dell Emulex 2Gb/s HBA Fibre Channel Card PCI-e LP1050EX-E RJ815

Dell Emulex 2Gb/s HBA Fibre Channel Card PCI-e LP1050EX-E

Dell P/N: RJ815

Emulex P/N: LP1050EX-E

Refurbished & tested.  Removed from a working Dell PowerEdge 2950 server.

STANDARDS

• ANSI Fibre Channel: FC-FS, FC-PH, FC-PI, FCP, FCP-2, FC-AL, FC-PLDA, FC-MI, FC-FLA, IETF IP over FC
• PCI Express Base Spec 1.0a
• PCI Express CEM Spec 1.0a
• PCI Express to PCI/PCI-X
• Bridge Spec 1.0
• Fibre Channel Class 2 and 3
• PHP hot plug—hot swap

ARCHITECTURE

• Emulex LightPulse technology
• 2Gb/s or 1Gb/s FC Link
• Quad Data Rate (QDR) SRAM Unified Data Buffer and Code Space memory
• 16 Buffer–to–Buffer Credits supported
• 1K+ Contexts Cached Onboard

DRIVER SUPPORT

• Windows Server 2003
• Windows 2000
• NetWare
• Linux (open build and open source)

HARDWARE ENVIRONMENTS

• x86 and Intel® Itanium® processor family
• PCIe 1.0a compliant @ 2.5 Gb/s

OPTICAL

• data rates: 1.0625/2.125Gb/s (auto–detected)
• optics: short wave lasers with LC type connector
• cable:
  • 50/125μm, up to 300 meters at 2Gb/s
  • 62.5/125μm, up to 150 meters at 2Gb/s

PHYSICAL DIMENSIONS

• standard height, half length x4 lane card
• 111.15mm x 167.65mm (4.376" x 6.600")
• standard bracket

POWER & ENVIRONMENTAL REQUIREMENTS

• volts: +3.3 and 12 VDC
• power: x4 lane link 15.7/22.3 watts (typical/max)
• airflow required: 100 lf/m
• storage temperature: -40
• relative humidity: 5% to 95% non–condensing

AGENCY APPROVALS

• Class 1 Laser Product per DHHS 21CFR (J) & EN60825
• UL recognized to UL 60950-1
• CUR recognized to CSA22.2, No. 60950-1-03
• TUV certified to EN60950
• FCC rules, Part 15, Class A
• ICES–003, Class A
• EMC Directive 89/336/EEC (CE Mark)
  • EN55022, Class A
  • EN55024
• Australian EMC Framework (C–Tick Mark)
  • AS/NZS 3548, Class A
• VCCI, Class A
• MIC (Korea), Class A
• BSMI (Taiwan), Class A