HP J9729A ProCurve 2920 48G POE+ Switch via Flagship Tech

Part Number(s): J9729A

HP ProCurve 2920-48G-PoE+ Switch (J9729A) SPECIFICATIONS

I/O ports and slots:

44 RJ-45 autosensing 10/100/1000 PoE+ ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T, IEEE 802.3at PoE+); Duplex: 10BASE-T/100BASE-TX: half or full; 1000BASE-T: full only

4 RJ-45 dual-personality 10/100/1000 PoE+ ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T, IEEE 802.3at PoE+)

2 module slots

Additional ports and slots

1 stacking module slot
1 dual-personality (RJ-45 or USB micro-B)
1 USB
1.11 RJ-45 out-of-band management port

Power supplies

1 power supply slot
1 minimum power supply required
includes: 1 x J9738A (HPE X332 575W 100-240VAC to 54VDC Modular Power Supply)

Physical characteristics

Dimensions
17.42 (w) x 13.23 (d) x 1.73 (h) in (44.25 x 33.6 x 4.39 cm) (1U height)
Weight
12.57 lb (5.7 kg)

Memory and processor
Tri Core ARM1176 @ 625 MHz, 512 MB SDRAM; Packet buffer size: 11.25 MB (6.75 MB dynamic egress + 4.5 MB ingress), 1 GB flash

Performance

100 Mb Latency
< 9.0 μs (FIFO 64-byte packets)
1000 Mb Latency
< 3.2 μs (FIFO 64-byte packets)
10 Gbps Latency
< 3.2 μs (FIFO 64-byte packets)
Throughput
up to 130.9 Mpps
Switching capacity
176 Gbps
Routing table size
2048 entries (IPv4), 256 entries (IPv6)
MAC address table size
16000 entries

Environment

Operating temperature
32°F to 131°F (0°C to 55°C)
Operating relative humidity
15% to 95%, noncondensing
Nonoperating/Storage temperature
-40°F to 158°F (-40°C to 70°C)
Nonoperating/Storage relative humidity
15% to 95%, noncondensing
Altitude
up to 10,000 ft (3 km)
Acoustic
Power: 62 dB, Pressure: 45.2 dB

Electrical characteristics

Frequency
50/60 Hz
80plus.org Certification
Silver
Maximum heat dissipation
399 BTU/hr (420.95 kJ/hr)
Voltage
100 - 240 VAC, rated(depending on power supply chosen)
Maximum power rating
487 W
Idle power
46 W
PoE power
370 W PoE+
Notes:
Idle power is the actual power consumption of the device with no ports connected.
Maximum power rating and maximum heat dissipation are the worst-case theoretical maximum numbers pro-vided for planning the infrastructure with fully loaded PoE (if equipped), 100% traffic, all ports plugged in, and all modules populated.
PoE power is the power supplied by the internal power supply. It is dependent on the type and quantity of power supplies and may be supplemented with the use of an external power supply (EPS).370 W of PoE+ power is available using the internal default power supply.

Safety
CE Labeled; EN 60825-1 Safety of Laser Products-Part 1; FCC Part 15, Subpart B; GOST; EU RoHS Compliant; EN 55022 Class A; EN 55024: 1998; C-Tick; ICES-003, Class A; VCCI Class A; IEC 60950-1 :Second Edition ; IEC 60825-1; EN62479:2010; CSA C22.2 No. 60950-1-07 2nd Edition; EN 60950-1:2006+A11:2009+A1:2010+A12:2011; IEC 60950-1 (ed.2): am1

Emissions
FCC part 15 Class A; VCCI Class A; EN 55022/CISPR 22 Class A

Immunity
EN
EN 55024, CISPR 24
ESD
IEC 61000-4-2
Radiated
IEC 61000-4-3
EFT/Burst
IEC 61000-4-4
Surge
IEC 61000-4-5
Conducted
IEC 61000-4-6
Power frequency magnetic field
IEC 61000-4-8
Voltage dips and interruptions
IEC 61000-4-11
HarmonicsIEC 61000-3-2
IEC 61000-3-2
Flicker
IEC 61000-3-3

Management
Aruba Central; Aruba AirWave Network Management; IMC – Intelligent Management Center; Command-line interface; Web browser; Configuration menu; Out-of-band management (RJ-45 Ethernet); SNMP manager; Telnet; RMON1; FTP; In-line and out-of-band; Out-of-band management (serial RS-232c or micro usb)

Services
Refer to the Hewlett Packard Enterprise website at www.hpe.com/networking/services for details on the service-level descriptions and product numbers. For details about services and response times in your area, please contact your local Hewlett Packard Enterprise sales office.